ISO 12128:2001

Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes

Publication date: 20 sht 2001

95.99 Withdrawal of Standard 30 pri 2020

General information

Current stage: 95.99 Effective date: 30 pri 2020

Originator: ISO

Owner: ISO/TC 123/SC 3

Type: International Standard

ICS: 21.100.10

Gjuha: anglisht frëngjisht

Buying

Statusi: Shfuqizuar

PDF - 7 123 Lekë

Paper - 7 123 Lekë

CD - 7 123 Lekë

Language

Language in which you want to receive the document.

Scope

This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes.
These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends in
particular on the specific operating conditions.
In addition, it enables the user to assign the different types of lubricant feed and distribution to plain bearing bushes
made of copper alloys, thermosetting plastics, thermoplastics or of artificial carbon.
NOTE Different types of lubricant feed and distribution for plain bearing bushes made of sintered metals have not been specified
due to the fact that these bushes are soaked with lubricant. Plain bearing bushes made of artificial carbon are not lubricated with
oil or grease.

Life cycle

PREVIOUSLY

WITHDRAWN
ISO 12128:1995

NOW

WITHDRAWN
ISO 12128:2001
95.99 Withdrawal of Standard
30 pri 2020

REVISED BY

PUBLISHED
ISO 12128:2020

National adoptions

SSH ISO 12128:2001

DPS

Kushineta të thjeshta - Vrima lubrifikimi, kanale dhe xhepa - Përmasat, llojet, përcaktimi dhe zbatimi i tyre në bokullat e kushinetave

60.60 Standard published

DPS/KT 74 më tepër